Solutions

Here you will find an archive of many previous REMAP solutions. These may be pieces of bespoke equipment or adaptations that have been made by REMAP volunteers. To find out more about an item, please click view details.

All Solutions

Vinnie’s Arm Support

0 comments

Vinnie has SMA type 1 and a few years ago he suffered a cardiac arrest resulting in a brain injury and dystonic posture.  He has extremely limited movement and communication capacity. His OT found that, when his elbows were supported... View Details

Rutland trolley adaptation

0 comments

The project to adapt the client’s Rutland trolley shows the importance of personalised solutions in assistive technology. By addressing the specific challenges she faced, the team were able to implement a successful solution that involved widening the trolley's legs. Despite... View Details

One-handed brake for 4 wheel walker

0 comments

The collaboration between the client, the occupational therapist, and the assistive technology expert led to a tailored solution for the client's mobility challenges after his stroke. The development of a 3D-printed cable doubler device has successfully addressed the limitations imposed... View Details

Portable Dog treat dispenser

0 comments

The Charity 'Dogs for Good' require potential assistance dog owners to be able to dispense single kibble dog treats to reward the right actions during their training period. This person has been waiting over a year to have an assistance... View Details

Jetty Ramp

0 comments

The Client, who has dementia and reduced mobility, required a ramp for accessing the main jetty from his houseboat. Previous ramp solutions have proven inadequate due to their inability to adapt to changing tides. View Details

Life without fingers and thumbs

0 comments

Our client contracted Covid fairly early on, which led to sepsis and necessitated the amputation of all fingers and thumbs. Help from the NHS was coming but not in the immediate future. I visited with her Occupational Therapist and saw... View Details

Backrest Cushion for Ypush Wheelchair

0 comments

REMAP Suffolk East was asked to make the backrest of a Ypush wheelchair more comfortable. View Details

Stair barrier

0 comments

A barrier to prevent the client falling down the stairs at night. View Details

Request to adapt mobility scooter

0 comments

Our client’s sister, an occupational therapist, contacted us to help adapt a privately purchased mobility scooter. She wrote that her brother was using a foldable mobility scooter.  However, reduced dexterity in his hands and fingers as a feature of progressive... View Details

Scooter Conversion to 3 Wheels

0 comments

This was a project for a 13-year-old girl, named Lillybet to convert a 2 wheeled scooter into a 3 wheeled one.  Lillybet has the intellectual capacity of a much younger child (around 3 years of age), and very poor balance... View Details

Dual Wheelchairs

0 comments

The client had two disabled teenaged boys, both who required wheelchairs, and they wished to be able to push both chairs with one pusher.  REMAP connected the two wheelchairs together so that they could both be pushed with one person. View Details

One-piece wheelchair footrest

0 comments

The client found that her feet slipped between her wheelchair footrests. A simple plywood platform was made that rested on the existing footrests, holding her feet in place. View Details

Holder on a Wheelchair For a Helping-Hand Grabber

0 comments

Solution to ensure a grabber is always to-hand for a wheelchair user.  View Details

New wing for custom chair

0 comments

Rosemary's MS left her with an uncomfortable seated position in her usual easy chair.  She was provided with a specialised, motorised tilt-in-space chair that should have provided all the support she needed to sit up comfortably.  However, the design relied... View Details

Poop Scoop Holder for Wheelchair User with Assistance Dog

0 comments

This client required a holder for a poop scoop on his wheelchair when he left the house with his assistance dog. View Details

Wheelie Bin Lid Lifter for Wheelchair User

5 comments

Our client, Emily, has Limb Girdle Muscular Dystrophy which causes weakness in her hips and shoulder muscles. Being a full-time wheelchair user, she cannot lift the lids on her wheelie bins. REMAP engineered a pair of remote controlled "Bin Lid... View Details

Motorised Neck Brace for client with MND

1 comments

The client needs to lean their head forwards in order to swallow. However, they have very weakened neck muscles, due to MND, and their head falls forward uncontrollably. The client is then unable to bring it back up without help... View Details

Profile Bed Control Adaptation

0 comments

Our client struggled to use the handset for her profiling bed and wanted to retain independence. In order to overcome this challenge, our REMAP engineer has adapted the handset to allow the client to easily operate the controls on her... View Details

A removable tray for a walking frame

0 comments

Our client uses his walker with one hand in the middle of the cross bar, rather than the two handles. He reached out to REMAP because he wanted to be able to carry some items around his flat and to... View Details

Leg Supports for Rollz Motion wheelchair

2 comments

This client has a Rollz Motion wheelchair and, for medical reasons, needs to have her legs horizontal. However, this wheelchair does not have an option for leg supports to be attached. I obtained some standard leg supports and designed and... View Details

Extended Gas Fire Control

0 comments

The client was sturggling to turn on her gas fire, after she broke her wrist. She is also being evaluated for dementia. View Details

Bed Control Activation Unit

0 comments

The client has Motor Neurone Disease resulting in increasing difficulty/being unable to press the hand control buttons to operate a profiling bed. The aim of the project was to provide a modified front face to the control unit which he... View Details

Adaptive Stairlift

0 comments

We were asked to design a device which would raise and lower the seat height for a Stannah stairlift for a lady with muscular dystrophy.  We designed the adaptive seat in CAD which enabled us to share updates and design... View Details

Moving table top

0 comments

Margaret has Motor Neurone Disease, and was keen to be able to move her plate away and access her communication device independently following a meal. The solution was inspired by a Lazy Susan type device that may be found for... View Details