Solutions

Here you will find an archive of many previous REMAP solutions. These may be pieces of bespoke equipment or adaptations that have been made by REMAP volunteers. To find out more about an item, please click view details.

All Solutions

Sofa Arm-Rest

0 comments

A client needed help with sitting to standing from their sofa. Raising the sofa alone was not sufficient as he needed something to press down on. View Details

Adaptive Stairlift

0 comments

We were asked to design a device which would raise and lower the seat height for a Stannah stairlift for a lady with muscular dystrophy.  We designed the adaptive seat in CAD which enabled us to share updates and design... View Details

Footplate Shields for Activity Chair

2 comments

The client tried using a Rifton Activity Chair, but he kept getting his foot trapped underneath the wheels. The company makes a footplate box, but it wasn't suitable as it would have prevented the client from standing and transferring on... View Details

Modified Stair Lift

0 comments

This client was unable to reach the lever of their stairlift which put them at risk of falling down the stairs. Their Occupational Therapist asked REMAP to adapt the lever, so the client could stay safe. View Details

Raised Sofa

0 comments

The client's OT contacted REMAP, because their sofa was very low, and she was struggling to get up from it. View Details

Seated leg press gripping frame

0 comments

This unusual request came from a local physiotherapy department, where the control panel on their seated leg press machine tended to be used by patients to pull themselves up off the apparatus, which wasn't doing the panel any good and... View Details

Assessment car for rehabilitation patients

0 comments

The East Kent Neuro Rehabilitation Department had an old quarter of a mini which used to be used as rehabilitation practice for their patients. However, this was thrown away during Covid. The department requested for something similar to be made... View Details

Wheelchair stick holders

0 comments

Kirah is a volunteer for the Harrogate and Ripon Group of Remap helping with publicity and fundraising.  A powered wheelchair user herself, Kirah had been carrying her bulky tripod-base walking sticks strapped to the rear of her wheelchair for some... View Details

Rollator carrier for electric chair

1 comments

The challenge was to construct a bracket to hold a three wheeled Rollator onto a electric chair so the client could access smaller shops that his chair would not fit into. View Details

Chair raisers for leather arm chair

0 comments

Our client has a leather suite with low profile square timber feet, but following a stroke, found it harder to get out of the chair. Most chair raisers, such the commercial "elephant feet" type, cater for chairs with proper legs... View Details

Arjo Sara Stedy additional cross rail

4 comments

Our client has a Swedish product called an Arjo Sara Stedy which is used to help his transfer from sitting to a standing position.  However, the nature of his chair and folding leg rest means his care team struggled to... View Details

Sit-to-stand sling modification

0 comments

The client uses a MiniLift sit-to-stand aid for transfers but the sling is unsuitable. The Oxford Journey aid has a more suitable sling, but the aid itself is too large to maneuver inside the client's home and its sling uses... View Details

Temporary duvet support

0 comments

  The client needs to sleep on her back until the post-op swelling of her hip and thigh recedes. She also needs to be able to move her feet and legs in order to lessen the risk of deep vein... View Details

Crutch Stand

0 comments

The client, an 80 y.o. woman, is unable to walk or stand for more than a few seconds due to severe arthritis in her right hip. The condition has worsened over the past 18 months, and now she is confined... View Details

Alternative to sofa raising

4 comments

Lynne has poor strength in her lower body and finds getting on and off her sofa almost impossible. She thought the answer might be to raise the sofa, as we have done so many times before. But the sofa was... View Details

Step Stool

0 comments

The usual solution for helping someone to get on/off the sofa or to get in/out of bed might be standard NHS step stools but given the client’s height the platform on these stools is too high for her to step... View Details

Breezi chair modification

0 comments

To make a foldable footrest for an existing chair for a client with special needs. View Details

Mini Lift Platform Footrest

0 comments

The client has Cerebral Palsy affecting all four limbs. She mobilises in a powered height adjustable wheelchair. She is weight bearing with support and uses a Mini Lift 125 for transfers. She previously had work done on her old Mini... View Details

Molift Knee Blocks

0 comments

The client had had recent surgery, preventing him from being able to transfer independently by standing following a surgery. This meant that he was having to be lifted by mum or hoisted at school. School had tried to use a... View Details

Standing Frame Modification

0 comments

The client uses a standing frame at school; but as she uses it, she twists her trunk. The Physio was keen to try and prevent her being able to twist so much by adding taller elbow blocks. The School Physio... View Details

Chair controller button protector

0 comments

The controller for this chair has four buttons mounted close together. Two of the buttons resulted in the chair becoming completely horizontal which caused the client to panic.  Her carers requested that these two buttons should be covered so that... View Details

Mattress Spacer

1 comments

This elderly client required a spacer to fill a gap in her mattress. She had been supplied with a pressure-reducing mattress topper, which (strangely) was 6″ too long for a standard double-bed. Normally, this would not cause too much of... View Details

Modify ReTurn sit-to-stand aid for child

0 comments

Platform configured to provide lower height Platform in raised configuration Platform disassembled ReTurn in normal use for comparison The ReTurn aid is used both for transfer of children from a sitting position, but also as a physio aid to stretch... View Details

Handles for wheeled garden seat

0 comments

The client struggles to get up from a wheeled garden seat when gardening. The handles on the seat are too low and the seat moves sideways when getting up. A pair of free-standing handles provide the required height and their... View Details