Solutions

Here you will find an archive of many previous REMAP solutions. These may be pieces of bespoke equipment or adaptations that have been made by REMAP volunteers. To find out more about an item, please click view details.

All Solutions

Tricycle steering lock

0 comments

A child with cerebral palsy has toppled his tricycle when turning the handlebars too sharply. A bracket was added to restrict the amount that they can be turned. View Details

Wheelchair table for art

0 comments

The Suffolk East branch of REMAP was asked by an Occupational Therapist in Social Services to provide a wheelchair table for art, suitable for someone with left side paralysis following a stroke. View Details

Bespoke bottle/cup holder for electric wheelchair

0 comments

Our client, Jenny, needed a bottle/cup holder for her electric wheelchair, so she would always have a drink available. Her family have searched for a holder but most are flimsy and widen the chair, which is impractical. View Details

Outdoor access ramps

0 comments

Our client, John, has an electric scooter which he is unable to keep in his store room because of a 150mm high step at the doorway. Similarly, there is a step at the edge of the car park which he... View Details

One-handed brake for rollator

2 comments

In summary, the collaboration between the client, the occupational therapist, and the REMAP engineer, led to a tailored solution for the client's mobility challenges after his stroke. The development of a 3D-printed cable doubler device has successfully addressed the limitations... View Details

One-handed brake for 4 wheel walker

0 comments

The collaboration between the client, the occupational therapist, and the assistive technology expert led to a tailored solution for the client's mobility challenges after his stroke. The development of a 3D-printed cable doubler device has successfully addressed the limitations imposed... View Details

Portable Dog treat dispenser

0 comments

The Charity 'Dogs for Good' require potential assistance dog owners to be able to dispense single kibble dog treats to reward the right actions during their training period. This person has been waiting over a year to have an assistance... View Details

Umbrella mounting for wheelchair

0 comments

Our client who uses a powered wheelchair needed an (opened) umbrella mounting so his hands are free to make him independent. View Details

Backrest Cushion for Ypush Wheelchair

0 comments

REMAP Suffolk East was asked to make the backrest of a Ypush wheelchair more comfortable. View Details

Model car remote control adaptation

0 comments

On a holiday a few years ago, Leon watched a family member having fun with a high speed remote control model car and really wanted to have a go! However, Leon has damage to his spinal cord, which results in... View Details

Wheelchair to rocking chair adaptation

0 comments

Talia has complex needs which are in part a result of scoliosis and spinal surgery. Her parents thought that it would be fantastic for her to 'experience some park life fun' by being able to adapt her wheelchair into a... View Details

Scooter Conversion to 3 Wheels

0 comments

This was a project for a 13-year-old girl, named Lillybet to convert a 2 wheeled scooter into a 3 wheeled one.  Lillybet has the intellectual capacity of a much younger child (around 3 years of age), and very poor balance... View Details

Bowling green access support

0 comments

A removable handrail to help a client to get onto the green of her local bowling club, following a stroke. View Details

Beach launcher for sea swimming

0 comments

A progressive condition has affected the mobility of an enthusiastic year round sea swimmer who swims  with a group of friends. It has become increasingly difficulty for her to get in and out of the water safely and more difficult... View Details

Bicycle handlebar adaptation

9 comments

The client is a keen cyclist and would like to take part in the coast 2 coast cycle ride for charity. However, her left hand stops at the wrist making it difficult to hold onto the handlebars, especially when rising... View Details

Poop Scoop Holder for Wheelchair User with Assistance Dog

0 comments

This client required a holder for a poop scoop on his wheelchair when he left the house with his assistance dog. View Details

Hand brakes for Silver Cross pram

1 comments

The client has problems with her balance and needs her pram to be stable and under control at all times. View Details

A removable tray for a walking frame

0 comments

Our client uses his walker with one hand in the middle of the cross bar, rather than the two handles. He reached out to REMAP because he wanted to be able to carry some items around his flat and to... View Details

Leg Supports for Rollz Motion wheelchair

2 comments

This client has a Rollz Motion wheelchair and, for medical reasons, needs to have her legs horizontal. However, this wheelchair does not have an option for leg supports to be attached. I obtained some standard leg supports and designed and... View Details

Touch control for mobility scooter

2 comments

Our client, Christine, has a mobility scooter but has not been able to use it for many months because operating the control levers causes pain in her arthritic hands. View Details

Archery bow stand for wheechair and standing users

5 comments

Our clients required an archery bow stand which would suit standing and sitting children with learning difficulties, enabling them to compete in the sport. View Details

Dog Ball Launcher

0 comments

Our client wants to be able to interact with his dog by playing fetch, but finds it challenging due to his reduced mobility. Therefore, to overcome this challenge, our REMAP engineer has expertly designed and created a bespoke dog ball... View Details

Attaching a Dog Trailer to a Mobility Scooter

8 comments

The client wrote, “I have dystrophic epidermolysis bullosa recessive (EB). It means my skin shears off or blisters at the slightest touch. I can’t manage fiddly things like catches etc. I was diagnosed at birth. Any damage to my skin... View Details

Lightweight Mounting Block for Disabled Rider

2 comments

The client rides with Riding for the Disabled and had problems getting onto her pony. She asked REMAP to make a bespoke mounting block, so she could mount her pony unaided. View Details