Solutions

Here you will find an archive of many previous REMAP solutions. These may be pieces of bespoke equipment or adaptations that have been made by REMAP volunteers. To find out more about an item, please click view details.

All Solutions

New wing for custom chair

0 comments

Rosemary's MS left her with an uncomfortable seated position in her usual easy chair.  She was provided with a specialised, motorised tilt-in-space chair that should have provided all the support she needed to sit up comfortably.  However, the design relied... View Details

Beach launcher for sea swimming

0 comments

A progressive condition has affected the mobility of an enthusiastic year round sea swimmer who swims  with a group of friends. It has become increasingly difficulty for her to get in and out of the water safely and more difficult... View Details

Bicycle handlebar adaptation

4 comments

The client is a keen cyclist and would like to take part in the coast 2 coast cycle ride for charity. However, her left hand stops at the wrist making it difficult to hold onto the handlebars, especially when rising... View Details

Hand brakes for Silver Cross pram

1 comments

The client has problems with her balance and needs her pram to be stable and under control at all times. View Details

One-handed knitting

0 comments

This client wanted an aid to allow her to continue knitting after losing the use of her left arm as a result of a stroke. View Details

Special toilet support rail

0 comments

The client requires additional support while sitting on the toilet. A removeable cross-rail was added to the existing drop-down rails View Details

Motorised Neck Brace for client with MND

1 comments

The client needs to lean their head forwards in order to swallow. However, they have very weakened neck muscles, due to MND, and their head falls forward uncontrollably. The client is then unable to bring it back up without help... View Details

Activity board for an adult

0 comments

We were asked if we could make a heavy duty activity board for an adult who was living in a care home. He is quite strong but the care team were anxious to keep him occupied. View Details

Profile Bed Control Adaptation

0 comments

Our client struggled to use the handset for her profiling bed and wanted to retain independence. In order to overcome this challenge, our REMAP engineer has adapted the handset to allow the client to easily operate the controls on her... View Details

A removable tray for a walking frame

0 comments

Our client uses his walker with one hand in the middle of the cross bar, rather than the two handles. He reached out to REMAP because he wanted to be able to carry some items around his flat and to... View Details

Leg Supports for Rollz Motion wheelchair

2 comments

This client has a Rollz Motion wheelchair and, for medical reasons, needs to have her legs horizontal. However, this wheelchair does not have an option for leg supports to be attached. I obtained some standard leg supports and designed and... View Details

Extended Gas Fire Control

0 comments

The client was sturggling to turn on her gas fire, after she broke her wrist. She is also being evaluated for dementia. View Details

Food Preparation Device for Amputee

3 comments

Our client lost both hands in an accident and wishes to be able to prepare food. A sleeve was made that straps onto his arm to which different knives can be fitted. View Details

VitrA Shower Control Adaptation

0 comments

A 3D printed lock-on handle to assist a gentleman with reduced hand function to operate one of the controls on his VitrA shower mixer. View Details

Footplate Shields for Activity Chair

2 comments

The client tried using a Rifton Activity Chair, but he kept getting his foot trapped underneath the wheels. The company makes a footplate box, but it wasn't suitable as it would have prevented the client from standing and transferring on... View Details

Archery bow stand for wheechair and standing users

5 comments

Our clients required an archery bow stand which would suit standing and sitting children with learning difficulties, enabling them to compete in the sport. View Details

Dog Ball Launcher

0 comments

Our client wants to be able to interact with his dog by playing fetch, but finds it challenging due to his reduced mobility. Therefore, to overcome this challenge, our REMAP engineer has expertly designed and created a bespoke dog ball... View Details

Voice Amplifier

0 comments

This project uses a hyper-directional microphone, connected to a small amplifier and loudspeaker, to help the client, who has very quiet speech, be understood whilst in bed. If this helps the client dictate into her mobile phone that will be... View Details

Oven Door Opener

0 comments

The client has quite weak hands and arms, and found it virtually impossible to open the oven door; she always needed the help of her husband. Like most oven doors there is an initial force that must be overcome to... View Details

Bespoke Cutlery for Post Polio Sufferer

2 comments

Hazel suffers with manual dexterity following polio. She needed a set of cutlery that allows her to feed herself, which fits her hands comfortably, and will not degrade in the dishwasher. Earlier bespoke cutlery lost its shape in hot water... View Details

One-handed Sandwich Cutter

0 comments

An elderly stroke survivor with significant left-sided inattention and upper limb hemiparesis wanted to be able to make and cut his own sandwich to reduce dependence on his carers. The reliance on his right hand had made using knives risky... View Details

One-handed wheelchair lock

0 comments

The client wanted a way of securing her wheelchair with a lock that could be operated single-handed. View Details

Walker quick release clips

0 comments

A simple solution to allow a walker / rollator to be taken apart easily by a gentleman with arthritis, so it can fit in his car. View Details

Eyegaze mount for wheelchair user

0 comments

Allowing the wheelchair user to be mobile with his Eyegaze screen View Details