Solutions

Here you will find an archive of many previous REMAP solutions. These may be pieces of bespoke equipment or adaptations that have been made by REMAP volunteers. To find out more about an item, please click view details.

All Solutions

One-handed brake for rollator

2 comments

In summary, the collaboration between the client, the occupational therapist, and the REMAP engineer, led to a tailored solution for the client's mobility challenges after his stroke. The development of a 3D-printed cable doubler device has successfully addressed the limitations... View Details

One-handed brake for 4 wheel walker

0 comments

The collaboration between the client, the occupational therapist, and the assistive technology expert led to a tailored solution for the client's mobility challenges after his stroke. The development of a 3D-printed cable doubler device has successfully addressed the limitations imposed... View Details

Hand brakes for Silver Cross pram

1 comments

The client has problems with her balance and needs her pram to be stable and under control at all times. View Details

Pushchair emergency brake

0 comments

This project provides an adaptation to a pushchair such that it will not roll away if inadvertently released. It therefore provides safety. View Details

One-handed Rollator brake – one brake, two wheels

4 comments

The client could only use one hand to brake his four-wheel Rollator. This meant that sometimes, the Rollator would swing wildly and had resulted in occasional falls. The solution made the Rollator much more stable when the right-hand brake was... View Details

Brake Modification on Shower Commode Chair

0 comments

The client uses a T70 shower commode chair for toileting and showering. As he lives alone without careworker support, he needs to operate both brakes by lowering the left lever, which needs to be higher and longer than the original.... View Details

Emergency Brake for Baby Stroller

7 comments

Our client was a young mother-to-be who suffered from dramatic and unpredictable seizures. She was concerned that if she were to experience one of these seizures when she was out with her baby in the stroller, then she would not... View Details

One-handed Brake for Mobility Scooter

0 comments

The client had lost the use of one hand. He had purchased a new mobility scooter. However, to operate the parking brake you had to pull the brake lever with one hand and raise a locking plunger with the other... View Details

Pushchair safety brake

3 comments

To provide an automatic pushchair brake which is applied if the handlebars are released by accident. View Details

Drag brakes for rollator

0 comments

The wheels of the client’s existing rollator slip on a steep hill with a camber, meaning she sometimes has to cling to a signpost and wait for a passer-by to help her.  She did not have the strength to apply... View Details

Bicycle for boy with Downs Syndrome

0 comments

Theo is a 9 year old boy with limited capacity to control his movements and a lack of awareness of danger.  He wanted to ride a bicycle like other children.  The challenge was to modify a bicycle of suitable size... View Details

Modified Bike

2 comments

Olivia wanted to cycle, but has low muscle tone, so can only pedal a few turns on her own. When younger, she had a toddler bike with a push handle, whereby the parents could control direction and speed; and with... View Details

Rollator brakes

0 comments

A client has a progressive muscle weakness, that particularly affects hand grip, walking and balance. He is having trouble operating the brakes on his wheeled walker and this makes him feel very unsafe. View Details

Passenger Trailer for Tricycle

4 comments

The challenge is best outlined in the original request from the boy’s mother. “I was wondering if Remap might be able to enhance my 15 year old son Tom’s trike. He has recently got the go ahead to get a... View Details

Short child’s access steps

1 comments

View Details

Improved braking on walker-trolley

0 comments

Typical walker-trolley Modified wheels The client has motor neurone disease and uses a walker trolley to get around the house, but finds the brakes are not good enough to provide the required stability. It was found that the poor braking... View Details

Weak-grip braking for 3-wheel rollators

0 comments

Many clients lack sufficient grip in at least one hand to operate the brakes on their rollator. If they have an adequate grip with the other hand, the brake cables can be paired through a ‘monkey face’ balancing plate to... View Details

Trolley walker with gutters and brakes

0 comments

Fitting gutters to a tea trolley is a common requirement. On the older-style Bardon trolley, this is easily done by attaching the upper sections of standard gutter crutches. However, these trolleys are unbraked, and clients with balance problems may have... View Details

Chair with castors

0 comments

Chair with castors braked Chair with castors unbraked Sketch The client needs to be able to move his dining chair easily under the table to eat, etc. Castors were added to the chair with hand-operated brakes on the trailing castors.... View Details

Buggy failsafe brake

0 comments

Modifications to the buggy wheels Modifications to the buggy handlebar New parts New clamp to fix new brake cable to existing brake rod.  Identical clamp was used to fix the cable at the other end to the new brake bar... View Details

Walker Brake Handles Modified

0 comments

[caption id="attachment_3622" align="alignnone" width="600"] The finished modifications[/caption] This elderly client had very limited ability to use his fingers to pull up on the brakes of his walker. He mainly used the walker by resting his knuckles on top of the... View Details

Commode brakes

0 comments

Client has Parkinsons and arthritis and finds the brakes on her glideabout commode to heavy to apply herself. Without her husband's help she can't stabilise the commode to transfer to the stairlift. A 2nd hand commode was acquired and the... View Details

Walking frame retarder

0 comments

A common problem with walking frames is ‘running away’. Where a brake is fitted it is usually not suitable for controlling speed – what is required is a constant preset retarding force. This device uses a contoured roller, spring loaded... View Details

Walker adaptation

0 comments

Following a stroke, Gwen had difficulty using a standard walking aid. She had a four -wheeled walker, but had difficulty steering it and using the braking system so she could sit down and rest safely. A crossbar was fitted which... View Details